Tuesday, June 2, 2015

Personal Death-Star-Style Remote-Controlled Floating Aircraft Beam Weapon: Theory and Proposition


The original Death Star may come from a galaxy far, far away and existed a long, long time ago; but this cannot stop the phoenix of death that is the orbital beam, and essentially all of it’s kin as beam weapons and even beam tools. The death star of earth may have no use to the common man as a large orbital station, instead, the joy of lasers can be wrought by personal death stars.

A floating sphere may seem like an odd concept, but this may be simply that balloons are not spherical. The Little Death Star was made of ultra light material and took it’s vantage existing as a balloon. This could even have small  solar powered rudders or wings to aid it in moving in the air. This is miraculous as now the death star floats as her fore-lady did so rightly. This ultralight plastic and air tight ball was filled with a light gas such as helium or hydrogen to allow it to float. This gas is important because it’s density will off-set the weight of the weapon system.

The weapon is a miraculous beam of death during the day, however it is completely solar powered and one must still rely on electric beam weapons in space, sadly, there are limits on the earth, unlike the perpetual solar power collectable in space.

The weaponry occurs inside of this clear light plastic floating air-tight sphere. The ball has translucence provided where applicable. there is still a dome that will fire the beam, this is traditionally at a -45 degree angle, occurring on the lower section of the sphere due to the nature of the weapon. There is a translucent intake bell-cone that can ultimately have a mouth anywhere from 45 to 180 or even more degrees of opening from the mouth. This being coned out making a circle, stopping where the circumference of the circle touches the edges of the sphere at all. The remainder of this area between the end circle of the focusing cone and the perimeter-face of is filled with a lens to focus the beam towards the light channel. This channel then focuses the light through a path of any length through the sphere, reflecting the light as needed to eventually come out of the beam-focus of the partial spherical indent in the lower side of the ship.


Once the beam had been focused sufficiently and reflected to where it fires out of the center of the beam canyon. This canyon is to provide a cooling area and a shorter distance for the focused hot beam to travel within the ship, and as well to keep the live beam away from sensitive areas of the ship that could be damaged by the heat.

The Beam could function. A reflective jutting high% conic crystal-prism sits at the bottom center of the bell to collect the light that comes in, this prism is cut so that the collected light refracts and exits directing the dark-face of the prism that is not exposed inside of the bell, but is the part of the bell-gem that exits into the inner workings of the beam-weapon. The light is refracted at an angle so that it is emitted in a focused beam in one direction that can be collected, this, even if there is no gem that does this, and so a reflective ring at an angle of around 45 degrees  looks a bit like a single stove-coil round the center of the bell at the bottom, as the bell faces upwards. This reflective ring or gem focuses light into a single beam that can be directed out of the focus-crystal  that takes this beam of light, say, 

rings of mirrors like smoke rings to collect and redirect incoming light into the glass focus, or on to each other to eventually reach the glass focus. These smoke-ring mirrors extend throughout the bell.  To a numbers man. These look like a factor tree of a number, with the initial number at the bottom, and the tree going up, with factors at the top, ant this number being divisible entirely by twos the entire time.

16 concentric mirror rings at top
these focus incoming light into lower into 8 rings

these 8 focus into 4 rings
2 rings focus into the base ring

The rings suspended along a strong but thin string. Threaded through the rings to one another ensuring proper distance and alignment and attached to the top of the sphere.


The mirror rings  take a \  backslash or downward/inward slant approach

This is so were the ring positioned at 90 degrees by fair weather or otherwise. Light that strikes from any side of the death star from any angle below that of the backslash down-in slant will hit the outer face of the “pineapple mirrors” this will reflect approximately a 90 degree angle downward with a columnar orientation of the rings degree  into the concentric ring below that was aligned to where it would strike the inner face of the lower ring, this reflecting it at a 90 degree angle inwards, this reflection means it is headed directly towards the outer face of the parallel concentric mirror ring, which would then reflect it 90 degrees downward again. This process repeats indefinitely until the prime ring reflecting downward hits another backslash mirror ring that is inlaid to the base of the mirror-bell. with a concentric slash(reverse oritneted reflecing ring, if an inward is a 135 degree angle, the slash mirror ring has a 45 degree angle, and these would reflect upward, rather than downward like a backslash mirror ring. After hitting the slash mirror ring, it is going upwards, unlike most light going downwards, but this upward light then  hits the inside of the prime backslash mirror ring. this will send all of the light inwards towards the center of the ring. This prime ring has a crystal beam focus inside of it that collects the flowing light emitted by the mirror ring that hits the crystal on all sides, light and condenses it into one solid beam. The effect of being struck by light from all sides means that the more independent faces, ~higher the number of intake faces on the crystal would mean that more light is collected at the correct angle to be refracted.

This bell-focus-crystal crystal  can also be “Cap crystal” ,rather than both preserve proper refraction angle, beam preservation, and focusing, the cap crystal can provide simple focusing of the raw light emitted by the prime ring, the prime ring and the light it emits a circular plane of light inward, this is known as the primary light-plane.  The purpose of the cap crystal is to focus this raw light by condensing the light  if the circle of 80 radius had a height of 8 to be a cylinder, it would be taking this circle of light and reducing the height of it’s spread, even if it requires another mirror ring system through the hollow of the cap crystal, as the Cap Crystal being the center of the primary light circle, would have a radius of ~4 or 8, and then a hollow of 4 or 2. that has  a hollow point that has the “bottleneck” crystal inserted into it 

With or without any actual insertion, the bottle-gem is what takes this beam of light that is now directed into it, and focuses it. This would be much like how a magnifying glass can focus the sun into a tiny point at the right height, the bottle-gem plays the same role in the death star. The bottle gem is unique, in that it is a moving part, unlike the rigidly suspended mirror rings and fixed bell-focus-crystal.

 Light beams are curious and need a certain distance to focus on a target that is oh so far away, otherwise the beam will not be focused and it will not be a destructive force of concentrated light, only a mild increase in lighten a small area that was large enough to dilute the light to where it is harmless. The bottle-gem overcomes this limit by being able to move within the “bottle” or tube that holds this focusing crystal.

This effectively works like moving one’s hand back and forth to change the focus of the beam emitted by the magnifying glass. This may seem foolish, as there is one ideal maximum focus of heat and distance for every lens. This is true, however, the death star is mobile and it would not be uncommon for the death star to be floating around and be very distant from the ideal distance from the target to achieve the maximum amount of focus of the beam to the target. The ability to move the lens to provide different concentrations provides adjustable functional range on the weapon, able to change from ideally hitting a target that is 5 yards away, to now hitting a target that is 10 yards away. This is as if the ground (the target) were to move away from you, while you were standing there attempting to focus the magnifying glass to burn the heretic ants and witch ants. When the ground moves away, this changes the focus on your beam, no longer as focused, just like moving the magnifying glass away from the ground will also change the focus of the beam, if one had previously focused it and was holding it in this position.

The bottle-gem emits a very focused light. This can be further refined and defined or filtered as one would enjoy doing with lasers, or this can also be sent directly  to the beam-focus-crystal, one of the common sort that increases the concentration of focused beam of light

The beam-focus-crystal can also work as a refining lens, much like a microscope has a broad spectrum knob, and a specific spectrum knob to change the focus of the scope greatly or slightly. This would in turn make the beam focus crystal another bottle-gem functioning much like a magnifying glass that is housed a “bottle” or light bottle. There are many ways one can condense a beam that one has collected to a refined point.

This is a delicate machine, and it requires much calibration while still being air tight. If this is calibrated correctly it should focus the beam very well, perhaps enough to start fires. It does only work in the day time, but it does not require one to buy ammunition.




The beam-focus or weapon-crystal can be a single gem, or it can be a bottle-gem and a tube. If it is the latter, one wants to idealize the end of the tube into a proper laser/light beam emitting face and shape. There would be a separate instance within the tube that limits how far the weapon-bottle-gem can travel inside of the tube.


Having a flammable gas provide buoyancy to the R/C Aircraft Beam-Weapon is foolish and can be very dangerous, just as fire will start when there is a fuel and oxygen and a spark, one must remember that lasers are heat and this is prone to igniting flammable, so this means one should avoid using a light gas that is not readily flammable when filling the Floating Beam Weapon with a gas that induces buoyancy in air, up to a certain point, only allowing the orb to float just enough so that it will not float away, and it will not sink ( a very specific calibration; one can even have ballasts that can jettison a small bit of buoyancy filling if the pressure increases.



One can have a mirror that can slide over a gap between the output of the bell-gem and inner gem-tube/bottle This would reflect the light out of the bell, rather than have the weapon actively emitting it’s powerful beam. This mirror-shutter is much like the trigger for this weapon. It can have a fail-safe that would burn up when the weapon got too hot, and this would close the shutter until the “shutter fuse” was replaced.

This could also be called. Beam-Orb Companion, or Floating Remote Control Beam Weapon, rather than Death Star due to copyrights. The orb can be solar powered to provide things like shutter control via a remote, rudder and fin control via remote, and control of the position of the bottle-gem within the gem-tube and control of the focus-crystal bottle-gem if the focus crystal is of the bottle gem sort.

The real Death Star had 3 lasers around the perimeter of the laser-dome that fed into a crystal at the base of the dome. This could be to avoid massive amount of heat, as splitting the beam before it is launched into pieces would cause a substantially cooler beam. This can be accomplished if one desired.




The correct alignment of the mirrors can be aligned by using a flashlight that is mounted at a common angle of the sun towards your beam system.


Go make an evil someone’s dreams come true.
~~
Edit

One can even put a backslash cork on the inside of the center rings that would reflect light inside of them 90 degrees downwards, but also focus light that came through their top, as right now, the center ring stalls before the end.

3 comments:


  1. The entire bell pit area on the death star was mirrored so that it would reflect light that did not get caught into the focusing tower towards the ring system in hopes that it will be refined and focused.

    ReplyDelete

  2. The concentric mirror rings descend down in number, one ring at a time, not by dividing by two.

    # of concentric backslash rings per level
    8
    7
    6
    5
    4
    3
    2
    1
    \\B ~bell crystal
    _\\G-bottle-gem
    __\\F- Weapon-Focus Crystal / second bottle gem
    ___( O )__ Beam Canyon [It would be bigger than this, but think of the death star]

    ReplyDelete

  3. The concentric mirror rings descend down in number, one ring at a time, not by dividing by two.
    Even more so; here is an explanation that has more words, whether or not they are helpful to the picture, is another matter entirely.
    (Another view)
    # of concentric backslash rings per level
    8
    7
    6
    5
    4
    3
    2
    1
    \\B //~bell crystal_______________\\\ orb full of mirrors } [arch around from the curled bracket to the 8]
    _\\G/-bottle-gem_______________________________} [Below the orb of mirrors was a blank area*]
    \|\|\\0//|/|/ _________________________________} [condensing mirror, beam incubating chamber ]
    \\|\\0//|// _______________________________} [this for bonus initial beam coalesce time before 2nd focus]
    __\\F/- _____________________________} [Weapon-Focus Crystal / second bottle gem]
    ___( O )_______________________} Beam Canyon [It would be bigger than this, but think of the death star]
    %%%!%%%______________}
    %%%!%%%________}
    laser/beam ~~ !

    o allow for a longer time for the beam to coalesce before entering the below Weapon-focus-crystal
    * for anything else to occur. the craft designed to float like a boat with the mirror side face up, with a larger volume for the helium to occupy; this and the airtight medium of air body or vacuum below this line , with a secured tinsel of weight one would want to have the one bottom part of the orb weigh enough to keep the beam pointed down: this if the weight of the crystals and weaponry occupying the bottom was not enough to weigh down the craft, which could be a likely circumstance. The weight can be at the bottom of the ship, with the laser-dome out at a -45 degree angle of sorts. this to keep the beam focused at the ground targets and able to retain the “mast” of the collection of rings a float. Ironically, when something is floating upwards, the bottom of the vessel is still downwards towards the ground, so the light rings can fall and this is why the must individually be suspended. focus with

    This balloon could have a kite attached to it in such a way that one could manifest the orb of it’s own weight to fly the small kite a bit like a person, with the intention to have the wind catch into kite and pull the orb like one can feel a kite do when you are flying it. This would give one the incentive to use the orb, while an ultralight kite or even a windsail supporter by helium or light weight particles and these ballon ballasts that would not sink, but would float away like balloons, multiples of these are rigged onto a kite frame, and then these take the kite into the air to a point of taughtness on the rope and this allows the vessel to sail a kite to determine where it moves.

    ReplyDelete