Tuesday, June 9, 2015

Theoretical Gravity Engine and Artificial Star Engine Creation Hypotheses


This is a postulation of a theoretical or magical propulsion system that utilizes concentrated gravity moving in a direction to pull the ship in the direction that the gravity is traveling.

The gravity propulsion is provided by spheres on rails that form helixes around the gravity-wave center. These helixes allow spheres to rotate around the inner-gravity-chamber, looking much like the brackets that allow a pinball to take a pre-defined path around a pin-ball machine. These preserve their momentum like a roller coaster one sees at a fair that is simply one loop connected to itself that loops indefinitely. Once the balls have traveled from the start of the inner-gravity-chamber around the helixes, the rails cause them to do a loop-the-loop and appear at the start of the system. These balls are powered by wheels of sorts applying the needed momentum to allow the ball to roll through the rails through the friction between the rails converting the circular momentum of the sphere into foreword momentum along the rails(this is space, so rails are on both top and bottom here, for 4 total rails).

These balls each are quite dense and large, and these have their own gravity, albeit a weak and insignificant amount. The gravity here functions much like waves here, as the balls are moving with a single direction rather than being relatively stationary. As the balls descend through the helixes, the gravity of each ball has a contructive effect on that of the others, as they all circle around this same pillar along their helix-rails. This creates a dense and concentrated wave of gravity traveling with the spheres as they move along the rails. Once the balls reach the end, they spread out as their momentum carries them back to the start, and this causes destructive interference on their collective gravities. As the first set of balls travels back towards the start, a second set of balls is traveling through the helixes; this is creates a stream of gravity that is the most compressed at the center, and carries things along a direction, while the balls going the opposite direction back towards the start after reaching the end of the helix are further away from the pillar to be less effected by this directional-gravity; but these balls can still rotate in helixes around the pillar to further provide some form of gravitational constructive interference. This jet of gravity  would attract things in the direction that it is traveling, and makes it a viable engine for a space-craft, when you happen to smoke copious amounts of cannabis and have very little education in fields such as this.


The gravity-waves spinning in helixes around the engine are constructive in most forms, but are destructive in terms of distances between the waves, eventually focusing into a single point. This appears much like strands of thread that are spinning in circular waves around the pillar that are all attached to one point at one end, but attached around a ring at the other end, and as the point twists, the ring on the other end twists along with it. (To visualize this dangle a plastic ring with 3 pieces of string suspending it in the air, and have these pieces of string all meet at one point; as the point rotates, it will make circular waves with frequency depending on the rotating speed of the collective conic-point where the 3 strings finally meet).   This creates immense pressure upon that point of space time as it holds so much energy in the form of gravitational attraction, this energy is ephemeral, but it can be sustained by the gravity-helix engine, and this gravity-focus is what propels the ship towards it.

This also requires large amounts of energy to propel the marbles through the gravity-helix, even though this occurs in space; the balls still lose momentum due to the friction between the rails and the marbles, regardless of how minimized that is is.


Oh, look what i found in the back of an old issue of Boy’s Life magazine, an anti-matter production facility;

The ship produces anti-matter by breaking raw-material it finds (asteroids, garbage, anything); on a powerful electro-magnet system that does not relinquish it’s current but continues to circulated it. Breaking it, induces radioactive decay and inverts the spin and charge on the materials. A breaker robs the particle of all of it’s spin and stores this on a spindle, and it then interacts with alternating-magnet molecule, much like the alternating current that is commonplace, but this is instead alternating magnetism. Then a release magnet pushes the respective anti-particle away. The stored potential on the spindle (much like cranking back the bowl of a catapult with a wheel) goes through an atomic equivocal of a gear system that would invert the direction of a gear, and this spin is now the appropriate direction to be applied to the neuter particle to cause it to become antimatter.



This magnet system “breaks” the material by applying high pressure on the material and manipulation of the particles.

A rotating “ferris wheel” of electro magnets rotates above the matter-well where the raw-fuel is stored, these separate a certain type of particle at a time, each charged particle being susceptible to the magnetic pressure applied by the encroachment of a certainly charged magnet of a specific pole, and mangetic frequency to ensure that the magnetic waves are providing constructive interference with the repulsion of the pre-particle that one desires to sift off and convert into it’s respective anti-particle, with the possibility of destructive interference between the atomic binding forces allowing the initial particles to be more easily separated from the raw-fuel.



The space time pressure is created by rotating massive bodies to that their gravitational outputs create gravity with constructive interference, this gravity collects in the center of the pipe; and can be redirected with further spinning masses providing constructive gravitational interference that causes the gravity-wave to attract the loosed particles through the mediums described below in order to convert them into anti-matter. This is much like the propulsion system described above, but rather than attract a space ship, the responsibility of this gravity-helix is only to attract particles.

The matter sits on a plate with thin micro-porus vacuums isolated from any anti-materials, as this matter is attracted by the Space-time-pressure as it is broken; that allow certain particles to flow through it due to it’s fulfilled state and composition as a specific form of matter; these particles flow through this material like an electron does through a medium in the form of electricity. Electricity is common, there is also positricity, and neutricity; both working under similar concepts; just as a medium will emit an electron from one end when one is input into the other, each of these mediums has this capability through conductivity, or the equivocal force for each particle, such as upon a medium gaining a neutron, it must emit one through decay instantaneously, and this continues through a directed lattice to cause the particle to appear on the other side of the medium, and at this point the raw-particle can be utilized by the particle-breaker than converts it into anti-matter.

The matter-breaking process is a relatively slow process that slowly reduces the matter in the fuel-well, as it loses it’s atomic composition, the newly reduced elements re-form stable compounds through natural reactions as the process takes place.

After being broken into smaller anti-particles, then these streams are “woven” together to create stable, dense anti-molecules. These molecules are then fired in a vacuum chamber at the center of the chamber’s fuel wall. In this case, the fuel wall is  lead, but the higher the atomic number of the fuel wall, the more spontaneous acceleration the flux-engine will produce.



While i have very little basis for this hypothesis. Even if this primary power source does not provide any sort of thrust if it is fixed to an object, it can be located in space and utilized to provide a “boost” to a spaceship. This can be done by having the tube be hollow and open on both ends, and by alleging the La Grange points of the spheres as they travel through the gravity helix to create a mutual La Grange point,  for the ship to gain forward momentum via gravity without gaining momentum in any other direction, rather than utilizing another form of propulsion.



Secondary Power Source is a fusion core triggered by centrifugal force of a dense spinning core that causes this substance to implode and revert the substance into now separated heat-soluble-hydrogen components.

 Once this occurs, an anti-matter flux is beamed in to give stability to the star-core and rid it of disempowering neutrons, if this is available.



The centrifugal force is provided by a watermill of sorts. Two wheels touch the core and when these wheels spin they apply some of their momentum to the sphere. All aspects of this are very heat tolerant. The two wheels each have a watermill connected to them through a series of gears that provides the circular momentum. The waterwheels are  housed in canals and are rotated by means much like how steam will rotate the charging gears in a power plant.

These canals circle around the core and the streams feed into themselves and each other, attempting to recycle all captured energy that enters the canal and pushes the fluid around the circular paths to rotate the gears. The channels also have an escape channel into the water chamber that houses the water that is propelled through the gear system. The water chamber has two sections, separated by a wall, with a door between the two at the top. The water is filled to the level of the bottom of the door. One side of the chamber is the start chamber, the water is propelled down through the watermills before it escapes into the end-chamber, once it is here, the residual momentum on the water propels it through the door and back into the start chamber, allowing it to be recycled. The door opens into the start chamber to allow pressure in the end chamber to open it when applicable, the door is larger than the hole in the wall, to prevent it from being pushed into the end chamber from the engine process.



To propel the gears. The door to the end chamber is closed. The to sections of the water-chamber are not equal in side, instead there is an area above the start chamber that remains as air. A powerful nuclear bomb is lowered into the bomb-house above the start chamber, this area is not separated by any walls from the start-chamber filled with water below, but is instead simply a dome on top of the start chamber with a cap that can be unscrewed, have a thermonuclear bomb attached by chain, and then lowered into the water-chamber and screwed back in to allow the bomb dangle in the air in the bomb-house.

The with the door to the end-chamber closed, the bomb is detonated, and this blast pushes the water through the system. The water propels the water-mills which apply circular momentum along the X and Y axes of the sphere to the fusion-core in the fusion-chamber through their output wheels. As the water makes its way through the water-mill rings, it is in course to either remain in a circular system if possible, or otherwise it ends up in the end-water-chamber, where the pressure opens the door to the start-chamber, and this influx of pressure and water continues the cycle indefinitely, allowing the water to retain it’s momentum and direction in the system.

The system is closed in that there is no exhaust energy, rather the energy is retained in the system so it can be continuously converted into rotational momentum on the fusion-core. This rotation increases the centrifugal force acting upon the sphere evenly, as the water takes the path of least resistance following the blast, and as the water-canals to the water wheels are both equally prone to water flow, this applies an equal amount of X axis rotation and Y axis Rotation; allowing the centrifugal force to allow the fusion-core to retain it’s shape, rather than being warped by rotation that was not at a 1:1 rate along both axes.

Once the fusion-core becomes ignites into a star, then the chamber housing the fusion core expands upward along with all the parts involved, no longer being needed, and this new space houses the star-engine in space as it floats due to the lack of gravity.

When gravity becomes a factor that would impact the star, coolant is added to the star to halt the fusion process or at least slow it to a non-dangerous level due to the star being too dense.

The medium used as a fusion core is a compound that is prone to heat retention. Once it reaches the temperature needed to fuse hydrogen. The apparatus is released, and the compound retains its circular momentums in floating in space, A telescoping sphere then extends around the fusion-core, and hydrogen is flooded into this chamber from key points while the telescoping sphere retains the ideal pressure for the controlled fusion of hydrogen.



This may require a three canal system, with a wheel along the X, Y and Z dimensions, at 0 degrees along the equator running horizontaly, at a 90 degree angle from this point running vertically, and perhaps at the top of the sphere running diagonally.

The type of rotation desired is that so that any point on the outside of the sphere will move through every point of the outside sphere before returning to it’s original point.

This can be attempted while one is not in space (i.e on the ground), though the concept is not as stable. rather than the fusion-iginition system being released upwards and the floating sphere encapsulated by a containment telescoping-sphere; the process occurs normally up to this point, but then the fusion-core is released into a large containment-sphere, where the rotation on the fusion-core causes it to spin around the perimeter of the sphere, evenly mixing the hydrogen flooded containment-sphere as more and more hydrogen-pressure is applied into this sphere, allowing the dense cloud of gas to be compressed in the center by the centrifugal force applied by the transferred circular momentum from the fusion-core as it moves around the exterior of the containment-sphere. This is a plausible method of accomplishing this; granted the fact that I am making all of this up, quite willy-nilly.

2 comments:


  1. The secondary power supply can be modified to be a single water wheel attached to a traditional power generator functioning similarly to a wind-power turbine, rather than having the power applied to centrifugal momentum, the spinning of the water wheel produces traditional power from the rotation of the water wheel induced from the initiating blast.

    ReplyDelete

  2. The primary gravity-helix power source would require the balls to be going faster than the ship / spacecraft / satellite it is powering. This may be difficult to accomplish on a large scale.

    An alternate method to provide speed on the pinballs is by having the gravity-helix rails open on both ends, so that the ball enters from outer-space, and then exits at the end back into outer space. The helix-rails would be in an orbit around the sun, and the balls would collect speed in independent orbits before entering the helix at the same time, synchronized with the entry of the vehicle. The balls pull the ship through the helix before exiting, and rather than have the rails circle back around, the rails would be aimed outward to release the balls at an exact trajectory to release them into the proper orbit to eventually be able to re-enter the helix to provide another boost.

    This method means that a small amount of the momentum of the balls is transferred to the spacecraft each time, so as the balls slow down due to this, the gravity-helix rails would have to be repositioned slightly by thrusters or something to account for the slight change in the orbits of the balls.

    ReplyDelete